WARRANTY BATTERY
WARRANTY SYSTEM TIRES
1- Storage and Transport.
Batteries are filled with acid. Always, store handle and transport batteries in upright position.
-Store in a cool and dry place.
2- Initial Operation.
-The batteries are filled with electrolyte at a density of 1.28mg/ml during the manufacturing process and ready for use. Recharge if there is an insufficient starting power (see item 4).
3- Installation
-Switch off the engine and all electrical equipment.
-Avoid laying metallic objects (i.e.tools) across the battery terminals as this can cause short circuits.
-Clean the battery tray and clamp battery tightly after installation.
-Clean terminals,clamps and other components and lubricate slightly with battery grease
-Disconnect the old battery starting with the negative pole then positive.
-Ensure all terminals are clean.
-Reconnect in reverse order
-In case of starting difficulties, recharge slightly
4- Recharging
-Remove battery from the vehicle
-Remove vents -Ensure adequate ventilation.
-Only use suitable DC charger Connect the positive terminal of the battery to the positive output of the charger.
Connect the negative terminal accordingly.
-Only switch on the charger after the battery has been connected and switch off the
charger first after charging is complete. Charging current recommendation: 1/20 amperes of the battery capacity Ah.
-If the electrolyte temperature rises above 550 C, STOP CHARGING
-Check electrolyte level 5- Maintenance
-Keep battery dry and clean
-Do not use any chemicals or additives
-Do not open the battery.
-Recharge the battery in case of insufficient starting power
6- Warranty
-The warranty period starts on the date mentioned on the proof of purchase.
-The warranty will not cover incorrect fitment. lack of maintenance, accidental damage or faults on vehicle electrical systems
-If the warranty is accepted, the replacement battery will be covered for the remaining perid of time.